FETtec AIO 35A, Руководство пользователя

Страница: 6 / 13

Connection Diagram
Connection Layout top
Receiver connector:
•
GND
•
5V
•
TLM: Telemetry signal to receiver
•
SIG.: Receiver signal to FC
Acronym explanation:
•
Motor 1 - 4: pads for motor connection
•
GND: Reference Signal Ground
•
3-6S - / +: Battery input voltage (12V-27V)
•
Reset: Reset button to force the FC in bootloader mode, not needed for normal operation
•
RGB_LED: pad for LED connection
•
5V/GND/RX4/TX4: If onboard OSD is deactivated these pads are the connection for
another free serial (e.g. GPS)
Page 6