Batch Parameters –
A-MENU and PROGRAMMING
Brewers are shipped with all recipe batch buttons enabled and set to the defaults shown in A1-A6.
These are full batches. Adjust settings of the individual recipes under batch PRG “A”
Position Name and default setting
Range
Comment
A.20,30
A.50,60
Batch
Enabled or Disabled
YES/NO
The top batch on each side
cannot be disabled. (A10&A40)
A1
Brew Volume
3 liters CBS-1130V+
1.50 gal CBS-1150V+
CBS-1130V+
0.95 – 4.75 (Liters)
To switch between gallons and
liters, go to position B5
CBS-1150V+
0.50-2.00 (Gallons)
A2
Brew Time (Min: Sec)
4:00
2:00 – 12:00
Factory default total brew is 5:30
(4:00 brew time+1:30 drip delay)
A3
Prewet Percent
0%
0.00 – 15.0%
Percentage of total brew
volume.
A4
Prewet Delay
00:00 (Min:Sec)
0:10 – 5:00
Prewet must be > 0%
The time between end of prewet
cycle and start of brew cycle.
A6
Drip Delay
1:30 (Min:Sec)
0:30 – 6:00 Minutes
Brew switch continues to flash.
