Festool T12+3, Инструкция по эксплуатации, Страница: 12 / 42

12
Drilling
Adjust the switch [1-9] so that its marking faces
the drilling symbol [1-7] . Maximum torque is set in
this position.
Tool holder, attachments
Chuck BF-FX
The chuck BF-FX is used for clamping drill and
screwdriver bits.
Attaching the chuck BF-FX
X
Attach the chuck to the drill spindle [4-5] .
X
Pull the release ring [4-3] forwards.
X
Turn until the hexagon pin [4-4] on the chuck
engages in the hexagon socket holder in the
drill spindle.
X
Push the chuck all the way onto the drill spindle.
X
Release the ring [4-4] .
Detaching the chuck BF-FX
X
Pull the release ring [4-4] forwards.
X Remove the chuck.
Changing tools
X
Turn the clamping sleeve [4-2] anticlockwise to
open the clamping jaws [4-1] .
L
The arrow on the spindle indicates the opening
direction.
X
Insert the tool into the chuck.
X
Turn the clamping sleeve [4-2] clockwise to
clamp the tool.
Tool holder in the drill spindle
Bits can be inserted directly in the hexagon socket
holder on the drill spindle
[4-5] to shorten and re-
duce the weight of the machine.
Tool chuck CENTROTEC WH-CE
The tool chuck CENTROTEC WH-CE allows you to
change tools with a CENTROTEC shank in a matter
of seconds.
L
Always use a CENTROTEC tool chuck to clamp
CENTROTEC tools.
Attaching the CENTROTEC
X
Pull the release ring [5-3] forwards.
X
Attach the tool chuck to the drill spindle [5-4] .
X
Release the ring [5-3] .
Detaching the CENTROTEC
X
Pull the release ring [5-3] forwards.
X
Remove the tool chuck.
Changing tools
X
Pull back the green release ring [5-2] to attach
or detach tools with a CENTROTEC shank.
X
When attaching the tool, rotate until the hexa-
gon shank
[5-1] engages in the hexagon holder
on the drill spindle.
X
Release the ring [5-2] .
WARNING
Risk of injury
X
Make sure that the machine is switched off and
the battery pack has been removed before
changing the tool holding fixure, attachments
and tools.
CAUTION
Risk of injury
X
Clamp the tool centrally in the chuck!
BF-FX
4-2
4-5
4-3 4-4 4-1
CAUTION
Risk of cutting injuries when changing the tool!
X
Wear protective gloves!
WH-CE
5-1 5-2 5-3 5-4