Festool RENOFIX RG 80 E, Оригинальное руководство по эксплуатации

Страница: 3 / 9

11
GB
Renovation Cutter RG 80 E
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Use protective gloves!
Read the instructions
Not to be included in municipal refuse

Advice or tip
2 Technical data
Nominal voltage 220-240 V ~
Mains frequency 50 / 60 Hz
Power input 1100 W
Adjustable revolutions 2000 – 5900 min
–1
Tool diameter 80 mm
Weight 3.2 kg
Protection class II /
3 Prescribed usage
The machine works on the principle of an angle
grinder but uses also special tools for milling and
grinding, e.g. of concrete and plaster.
The machine is intended for removal of paint
coats, plasters, residues of wall tile and carpet
adhesives mainly from rigid surfaces. In addi-
tion, the machine can be used for roughing of fl at
concrete surfaces and for milling of lining work
transitions.
The user proper is responsible for improper us-
age.
4 Control Elements
[1-1] Additional handle
[1-2] Switch lever
[1-3] Adjusting wheel
[1-4] Handle
[1-5] Knob
[1-6] Backstop bar
[1-7] Suction fl ange
[1-8] Scale
[2-1] Bolt
[2-2] Retainer
[2-3] Washer
[2-4] Milling rings
[2-5] Tool carrier
[2-6] Guide surface
[2-7] Bolt
[2-8] Sliding part
[2-9] Slot
[2-10] Suction fl ange
[2-11] Guide surface
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
5 Notes on Safety Prevention
5.1 General safety instructions
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Safety instructions for all operations
Safety Warnings Common for grinding, surface
grinding, grinding with wire brush or ABRASIV
cutting:
a) This power tool is intended to function as
a surface grinder or a cutter with a cutter
head. Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all instruc-
tions listed below may result in electric shock,
fi re and/or serious injury.
b) Operations such as polishing or cutting are
not recommended to be performed with this
power tool. Operations for which the power
tool was not designed may create a hazard and
cause personal injury.
c) Do not use accessories which are not specifi -
cally designed and recommended by the tool