Festool PLANEX easy LHS-E 225 EQ, Оригинальное руководство по эксплуатации, Страница: 6 / 11

LHS-E 225
15
GB
large accumulation of metal dust may create
electrical hazards.
Kickbacks and corresponding safety instructions:
A kickback occurs as a result of using the power
tool incorrectly or misguidedly. It can be prevented
by taking appropriate precautions, as described be-
low.
a.
Hold the power tool firmly with both hands and
move your body and arms into a position that al-
lows you to intercept the kickback forces. Al-
ways use the additional handle, if there is one,
so that you have the best possible control over
the kickback forces or torque reactions during
start-up. The operator can control the kickback
and reaction forces by taking suitable precau-
tionary measures.
b. Never place your hands near rotating tools. The
power tool may move across your hand in the
event of a kickback.
c. Take particular care when working on corners
and sharp edges, for example. Prevent the in-
sertion tool from rebounding away from the
workpiece and jamming. The rotating insertion
tool tends to get jammed when working on cor-
ners and sharp edges, or if it rebounds in the pro-
cess. This results in loss of control or kickbacks.
Special safety instructions for sanding
a. Do not use oversized sanding discs. Follow Fes-
tool's specifications when selecting sanding
discs. A sanding disc that is too large and pro-
trudes over the sanding pad represents a cutting
injury hazard and can cause catching, disc break-
age or kickback.
Further safety instructions
– Harmful/toxic dust can be produced during your
work (e.g. lead-containing paint, some types of
wood and metal). Contact with this dust, espe-
cially inhaling it, can represent a hazard for oper-
ating personnel or persons in the vicinity. Comply
with the safety regulations that apply in your
country. Connect the electric power tool to a suit-
able extraction system.
To protect your health, wear a P2 protective
mask.
Always wear protective goggles to protect
against sanding hazards.
–If potentially explosive or self-igniting dust
is produced during sanding, the machining in-
structions issued by the material manufacturer
must always be followed.
– Attention: Risk of fire! Avoid overheating the
grinding material and the sander. Always empty
the dust container before taking a break. Swarf
in the filter bag or filter of the mobile dust ex-
tractor may self-ignite in unfavourable condi-
tions such as flying sparks when grinding metals.
Particular danger exists if the swarf is mixed with
paint, polyurethane residue or other chemical
materials and the grinding material is hot after
long periods of work.
– Hold the power tool firmly with both hands and
assume a stable stance when performing work.
Using both hands ensures that the power tool is
guided safely.
– Always use an antistatic suction hose with the
power tool. A slight electric shock may cause you
to panic briefly and become distracted, which
may result in an accident.
– Always use original Festool sanding pads. For-
eign pads are not suitable for the speed of the
sander and may break.
– Keep the carry bag out of reach of children.
Children may suffocate or be strangled when
playing with the carry bag.
– Only for AS/NZS: The tool shall always be sup-
plied via residual current device with a rated re-
sidual current of 30 mA or less.
2.3 Emission levels
Typically, the noise levels that are determined in ac-
cordance with EN 62841 (see EC declaration of con-
formity) are as follows:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 62841 (see EU Declaration of Con-
formity):
The specified emission values (vibration, noise)
Sound pressure level L
PA
= 69 dB(A)
Noise level L
WA
= 80 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Damage to hearing

Always use ear protection.
Vibration emission level
(3 directions)
a
h
< 2,5 m/s
2
K = 1,5 m/s
2