Festool HKC 55 EB, Оригинальное руководство по эксплуатации

Страница: 19 / 26

HKC 55 EB
19
GB
– Connect the machine to a suitable dust extractor.
– Regularly remove dust deposits from the motor
housing.
– Use an aluminium saw blade.
– Close the viewing window/chipguard.
– When sawing panels, they must be lubricated
with paraffin but thin-walled profiles (up to 3
mm) can be sawed without lubrication.
2.5 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 60745:
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3 Intended use
Cordless circular saws are suitable for sawing
– wooden materials and wood-based materials,
– plaster- and cement-bonded fibres,
– plastic materials,
– aluminium (only with a special saw blade for alu-
minium offered by Festool)
Only saw blades with the following specifications
can be used: saw blade diameter 160 mm; recom-
mended cutting width 1,8 mm, max. 2.2 mm with
restricted function of guide wedge; locating bore
20 mm; recommended steel blade thickness
1,5 mm, max. 1.8 mm; suitable for speeds up to
6800 min
-1
. Never use sanding discs in the ma-
chine.
The machine is designed and approved for use by
trained persons or specialists only.
The user is liable for improper or non-in-
tended use.
4 Technical data
5 Machine features
Wear protective goggles.
Sound pressure level L
PA
= 79 dB(A)
Noise level L
WA
= 90 dB(A)
Measuring uncertainty allow-
ance K = 3 dB
CAUTION
Operating noise
Damage to hearing
 Use ear protection!
Vibration emission level (3 directions)
Cutting wood a
h
< 2,5 m/s
2
Cutting metal a
h
= 3,0 m/s
2
Uncertainty K = 3 m/s
2
Cordless circular saw HKC 55 EB
Motor voltage 14,4 - 18 V
No-load speed 4500 min
-1
Inclination 0° to 50°
Cutting depth at 0° 0 - 55
Cutting depth at 50° 38 mm
Saw blade dimensions
recommended 160 x 1,8 x 20 mm
max. 160 x 2,2 x 20 mm
Weight without battery pack 3,4
[1-1] Handles
[1-2] Switch-on lock
[1-3] Lever for changing blades
[1-4] Retractor lever for pendulum guard
[1-5] Guide wedge
[1-6] Pendulum guard
[1-7] On/Off switch
[1-8] Lever for plunge function
[1-9] Split scale for cutting depth stop (with/
without guide rail)
[1-10] Extractor connector
[1-11] Angle scale
[1-12] Knob for angle setting
[1-13] Cutting depth adjuster
[1-14] Battery pack
[1-15] Adjustable jaws
[1-16] Capacity display
[1-17] Insulated gripping surfaces (grey shaded
area)