Festool ETS 125 REQ, Оригинальное руководство по эксплуатации

Страница: 11 / 66

ETS 125 REQ
11
GB
Original operating manual
1 Symbols
2 Safety instructions
2.1 General safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
2.2 Machine-related safety instructions
– Dust that is harmful to your health may be pro-
duced as you work (e.g. paint products contain-
ing lead and some types of wood).
Contact with
or inhalation of this dust may pose a risk for the
operating personnel or persons in the vicinity.
Observe the safety regulations that apply in your
country.
Wear a P2 respiratory mask to protect your
health. In enclosed spaces, ensure that
there is sufficient ventilation and connect an
extraction system.
Always wear protective goggles to protect
against sanding hazards.
– Clean work equipment soaked in oils, for exam-
ple sanding pad or polishing felt, with water and
allow to dry.
Work equipment soaked in oil may
combust spontaneously.
– Attention: Risk of fire! Avoid overheating the
grinding material and the sander. Always empty
the dust container before taking a break.
Swarf
in the filter bag or filter of the mobile dust ex-
tractor may self-ignite in unfavourable condi-
tions such as flying sparks when grinding metals.
Particular danger exists if the swarf is mixed with
paint, polyurethane residue or other chemical
materials and the grinding material is hot after
long periods of work.
– If the power tool is dropped or falls, check for
damage to the machine and sanding pad. Re-
move the sanding pad for closer inspection. Re-
pair damaged parts before using again.
Broken
sanding pads and damaged machines can cause
injuries and machine instability.
– Always use original Festool sanding pads. For-
eign pads are not suitable for the speed of the
sander and may break.
– While using the long-life dust bag be aware of
electric charge. Always when possible use an
antistatic suction hose with the power tool.
A
slight electric shock may cause you to panic
briefly and become distracted, which may result
in an accident.
– Only for AS/NZS: The tool shall always be sup-
plied via residual current device with a rated re-
sidual current of 30 mA or less.
2.3 Emission levels
Typically, the noise levels that are determined in ac-
cordance with EN 62841 (see EC declaration of con-
formity) are as follows:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 62841 (see EU Declaration of Con-
formity):
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Do not dispose of as domestic waste.
Tip or advice
Handling instruction
Safety class II
Sound pressure level L
PA
= 73 dB(A)
Noise level L
WA
= 84 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Damage to hearing

Always use ear protection.