14
Edge protector [6]
The edge protector
[1-6]
prevents the sanding pad
circumference from coming into contact with a sur-
face (e.g. when sanding along a wall or a window),
thus preventing back-kick of the machine, or ma-
chine damage.
Working with the machine
Observe the following instructions:
– Do not overload the machine by pressing with ex-
cessive force! The best sanding results are
achieved with moderate application pressure.
The sanding capacity and quality are mainly de-
pendent on the selection of the correct abrasive.
– Work in corners and on edges tends to subject
the tip to increased stress and results in in-
creased heat development. In such cases, work
with reduced contact pressure.
– Hold the machine with one hand on the handle
[1-9]
.
For sanding, we recommend the following settings
for the adjusting wheel
[1-3]
:
6
DTS 400 REQ
1
2
6
DTS 400 REQ
1
2
2
1
WARNING
Risk of injury
Always secure the workpiece in such a manner
that it cannot move while being machined.
Sanding work
Adjusting
wheel set-
ting
– Sanding with max. abrasion
– Sanding off old paint
– Sanding of wood and veneered surface
prior to paintwork
– Intermediate sanding of paintwork on sur-
faces
5 - 6
Содержание DTS 400 REQ
Страница 2: ......
Страница 3: ......
Страница 4: ...DTS 400 REQ 1 1 1 3 1 4 1 5 1 6 1 9 1 2 ...
Страница 5: ...RTS 400 REQ 1 1 1 4 1 3 1 4 1 5 1 6 1 7 1 9 1 8 1 2 ...