Festool CT MIDI HEPA, Инструкция по эксплуатации

Страница: 5 / 32

5
Technical data
Power consumption 400 - 1200 W
Connected load to appliance plug socket max. 1200 W
Total connected load max. (vacuum cleaner and plug socket) 2400 W
Volume fl ow (air) max., turbine 222 m 3 /h (7.84 cu.ft./h)
Vacuum max., turbine 24000 Pa
Filter surface 5000 cm 2 (775 sq.in.)
Suction hose, diameter x length 27 mm x 3.5 m (1.06 in. x 11.48 ft.)
Dimensions L x W x H:
CT MINI HEPA
430 x 330 x 420 mm (16.9 x 13.0 x 16.5 in.)
CT MIDI HEPA 430 x 330 x 470 mm (16.9 x 13.0 x 18.5 in.)
Container capacity:
CT MINI HEPA
10 l (2.6 gal.)
CT MIDI HEPA 15 l (3.9 gal.)
Weight:
CT MINI HEPA
8.7 kg (19.2 lbs)
CT MIDI HEPA 9.0 kg (19.8 lbs)
Power cable length 7.5 m (24.6 ft.)
Protection type IP X4
Service
Only qualifi ed repair personnel must perform
vacuum cleaner service.
Service or maintenance
performed by unqualifi ed personnel could result in
a risk of injury. For example: internal wires may be
misplaced or pinched, safety guard return springs
may be improperly mounted.
When servicing a vacuum cleaner, use only iden-
tical replacement parts. Follow instructions in
the Maintenance section of this manual.
Use of
unauthorized parts or failure to follow the Main-
tenance Instructions may create a risk of electric
shock or injury. Certain cleaning agents such as
gasoline, carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Health hazard by dust
Various dust created by power
sanding, sawing, grinding, drilling and other con-
struction activities contains chemicals known (to
the State of California) to cause cancer, birth de-
fects or other reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending on how
often you do this type of work.
To reduce your exposure to these
chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as dust masks that
are specially designed to filter out
microscopic particles. Wash hands after handling.
Symbols
Warning of general danger
Read the Operating Instructions/Notes!
Intended use
This dust extractor is designed for the aspira-
tion and evacuation of non-toxic, non-hazardous
dusts, dirt, sand, shavings etc., and for vacuuming
water.
This dust extractor is designed in accordance with
IEC 60 335-1 and IEC 60 335-2-69 for a higher
loading in industrial use.
The fi ltering performance of the overall unit, which is
fi tted with a HEPA fi lter element, corresponds to HEPA
quality H 13 (medium degree of fi ltration 99.95 %).