Festool 576941, Оригинальное руководство пользователя

Страница: 15 / 18

► Use the plug [6-2]to seal the suction open­
ing [6-1].
When commissioning the cordless mobile
dust extractor again, put the plug back into
the parked position.
► Place the suction hose [1-3] in the storage
box [1-2].
► Vacuum and wipe the inside and outside of
the cordless mobile dust extractor to clean
it.
► Place the cordless mobile dust extractor in
a dry room inaccessible to unauthorised
users.
13 Remote control
13.1 Intended use of remote control CT-F I
The remote control can switch the cordless
mobile dust extractor on and off automatically.
13.2 Assembly
Attach the remote control to the suction
hose [1-3] using the corresponding fastening
strap [1-20].
To connect the remote control and the
cordless mobile dust extractor, see sec­
tion 10.2 .
13.3 LED indicator [1-17]
The remote control's LED indicator displays,
the charge status of the remote control in addi­
tion to the Bluetooth
® functionality:
Flashes blue once
Confirmation of the connection button
[1-16] or MAN button [1-18] having been
pressed.
Flashes purple once
The remote control has been reset.
Flashes red
The remote control's battery is nearly
empty and must be replaced.
13.4 Changing the remote control's
battery [7]
The remote control is operated using a CR
2032 battery.
If the battery compartment is opened, we
recommend that you replace the seal (20 x
1.3 mm).
► Open the battery compartment closure.
► Replace the battery.
► Close the battery compartment.
13.5 Software update
To check whether a software update that will
enhance the functions of the remote control or
improve existing functions is available, a
Bluetooth
® connection to the Festool app can
be established.
► Press the connection button on the remote
control [1-16] until the LED indicator [1-17]
flashes blue.
► Follow the instructions provided in the
Festool app.
14 Warning signals
Warning
signal
Description of
warning signal
Cause Action
Visual LED [1-12] Flashes green Battery pack emp­
ty
Charge the battery pack
Incorrect battery
pack
Use correct battery pack (see
section 5 )
Flashes red Battery pack over­
heating
Leave the battery pack to cool
for approx. 10 minutes
Battery pack faulty – Change the battery pack
– Use the charger to check that
the battery pack is fully function­
al once it has cooled down
Lights up red Cordless mobile
dust extractor
overheating
See section 11.3
English
15