Festool 576071, Инструкция по эксплуатации

Страница: 17 / 18

Sanding work Adjusting wheel set­
ting
– Sanding with max. abrasion
– Sanding off old paint
– Sanding of wood and veneered sur­
face prior to paintwork
– Intermediate sanding of paintwork on
surfaces
5–6
– Sanding thinly applied undercoat
– Sanding wood with sanding cloth
– Edge breaking on wooden parts
– Smoothing primed wooden surfaces
4–5
– Sanding solid wood and veneered
edges
– Sanding rebate of windows and doors
– Intermediate sanding of paintwork at
edges
– Light sanding of natural wood win­
dows using sanding cloth
– Smoothing wooden surfaces using
sanding cloth before staining
– Rubbing stained surfaces with a
sanding cloth
– Rubbing or removing excess lime­
stone residue using sanding cloth
3–4
– Intermediate sanding of paintwork on
stained surfaces
– Cleaning natural wood window re­
bate using sanding cloth
2–3
– Sanding stained edges
– Sanding thermoplastics
1–2
9 Service and maintenance
WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main­
tenance work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.com/service
Always use original Festool spare
parts. Order no. at:
www.festool.com/service
EKAT
1
2
3
5
4
The tool is equipped with special self-discon­
necting carbon brushes. If they wear out, the
power supply is disconnected automatically and
the tool stops.
To ensure constant air circulation, always keep
the cooling air openings in the motor housing
clean and free of blockages.
In the event of a slowdown in performance or
increased vibrations, blow and clean cooling air
openings.
10 Accessories
Only use original Festool sanding and polishing
pads. Low-quality sanding and polishing pads
may cause serious machine imbalance that de­
creases the quality of the working results and
increases machine wear.
The PO numbers of the accessories and tools
can be found in the Festool catalogue or online
at "www.festool.co.uk".
11 Environment
Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information on REACH: www.festool.com/reach
12 General information
12.1 Information on data protection
The power tool contains a chip which automati­
cally stores machine and operating data. The
data saved cannot be traced back directly to an
individual.
The data can be read using special (contactless)
devices and shall only be used by Festool for
fault diagnosis, repair and warranty processing
and for quality improvement or enhancement of
the power tool. The data shall not be used in
any other way without the express consent of
the customer.
English
17