Festool 575788, Оригинальное руководство пользователя

Страница: 32 / 44

LED status in standby
The green
LED [2-4] lights
up constantly.
The bench-mounted
circular saw starts up
in approx. 10 sec­
onds.
The red
LED [2-5] flash­
es slowly.
The green
LED [2-4] lights
up constantly.
The bench-mounted
circular saw is ready
to use and is in stand­
by mode.
The red
LED [2-5] is not
lit.
The green
LED [2-4] flash­
es rapidly.
Restart protection
When activating by­
pass mode, the yel­
low SawStop switch
was released too ear­
ly.
To rectify the
fault, press the red
STOP button.
(alternating)
The red
LED [2-5] flash­
es rapidly.
The green
LED [2-4] lights
up constantly.
Contact with the saw
blade in standby.
Remove the
contact trigger and
wait approx. 5 sec­
onds until the fault is
rectified.
The red
LED [2-5] flash­
es rapidly.
The green
LED [2-4] is not
lit.
Cartridge locking de­
vice fault.
Switch off the
bench-mounted cir­
cular saw and check
the cartridge locking
device.
The red
LED [2-5] flash­
es slowly.
The green
LED [2-4] flash­
es slowly.
Saw blade missing or
too small.
Switch off the
bench-mounted cir­
cular saw and insert a
suitable saw blade
(see section 3 ).
The red
LED [2-5] lights
up constantly.
The green
LED [2-4] is not
lit.
Replace the car­
tridge.
Switch off the
bench-mounted cir­
cular saw. If the fault
is still not rectified,
insert a new car­
tridge.
The red
LED [2-5] lights
up constantly.
LED status during operation
The green
LED [2-4] flash­
es rapidly.
The saw blade comes
to a stop.
The SawStop
technology is active
and is triggered upon
contact.
The red
LED [2-5] is not
lit.
The green
LED [2-4] flash­
es slowly.
Activated bypass
mode.
The red
LED [2-5] is not
lit.
The green
LED [2-4] flash­
es slowly.
Contact with the saw
blade while bypass
mode is activated
The fault is rectified if
the saw blade comes
to a stop.
The red
LED [2-5] flash­
es rapidly.
LED status in standby or during operation
The green
LED [2-4] is not
lit.
Workpiece too damp.
Switch off the
bench-mounted cir­
cular saw and dry the
workpiece or contin­
ue sawing in bypass
mode.
The red
LED [2-5] flash­
es rapidly.
English
33