Contents
1 Symbols.....................................................12
2 Safety warnings.........................................12
3 Intended use..............................................13
4 Technical data........................................... 13
5 Functional description.............................. 14
6 Commissioning..........................................14
7 Battery pack.............................................. 14
8 Settings......................................................15
9 Tool holder, attachments..........................15
10 Working with the machine........................ 15
11 Service and maintenance..........................16
12 Environment..............................................16
13 General information..................................16
1
Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear protective goggles.
Wear a dust mask.
Do not dispose of it with domestic
waste.
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Tip or advice
Handling instruction
Inserting the battery pack
Removing the battery pack
2
Safety warnings
2.1
General power tool safety warnings
WARNING! Read all safety warnings, in
structions, illustrations and specifica
tions provided with this power tool.
Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2
Machine-specific safety notices
–
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring.
Cutting acces
sory contacting a "live" wire may make ex
posed metal parts of the power tool "live"
and could give the operator an electric
shock.
Safety instructions when using long drill bits
–
a) Never operate at higher speed than the
maximum speed rating of the drill bit.
At
higher speeds, the bit is likely to bend if al
lowed to rotate freely without contacting
the workpiece, resulting in personal injury.
–
b) Always start drilling at low speed and
with the bit tip in contact with the work
piece.
At higher speeds, the bit is likely to
bend if allowed to rotate freely without con
tacting the workpiece, resulting in personal
injury.
–
c) Apply pressure only in direct line with
the bit and do not apply excessive pres
sure.
Bits can bend causing breakage or
loss of control, resulting in personal injury.
2.3
Further safety instructions
–
Use appropriate detection devices to look
for any hidden supply lines or consult your
local utility company.
If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
–
English
12
