Festo YXCL, Руководство по эксплуатации

Страница: 20 / 56

20 Festo — YXCL — 2021-07b
Assembly
6 Assembly
6.1 Preparation
Fitting space
The required installation space depends on the selected configuration of the product.
•
Take the product dimensions from the CAD model.
The Y-module is mounted on a vertical mounting surface, e.g. a machine frame.
Mounting surface
The mounting surface must exhibit the following characteristics:
–
torsionally rigid
–
free of stress
–
sufficient strength to absorb the maximum forces
–
sufficient evenness
WARNING
Risk of injury due to falling product.
• Make sure the mounting surface is sufficiently strong to absorb the maximum forces.
• Only use the supplied mounting components.
• Secure the screw connections.
6.2 Mounting attachments
Depending on the configuration, appropriate adjusting kits are available for mounting and horizontal
alignment of the product.
EHMY-LP-EGC-…-KF 50 80 120 185 Number
Mounting
attachments
Stroke Hy
in Y-direction [mm]
£
475
£
600
£
450
£
590 2
476 … 950 601 … 1150 451 … 1100 591 … 1220 3
951 … 1425 1151 … 1700 1101 … 1750 1221 … 1850 4
1426 … 1900 1701 … 2250 1751 … 2400 1851 … 2480 5
– 2251 … 2800 2401 … 3050 2481 … 3110 6
– 2801 … 3350 3051 … 3700 3111 … 3740 7
– 3351 … 3900 3701 … 4350 3741 … 4370 8
– 3901 … 4450 4351 … 4500 4371 … 4500 9
– 4451 … 4500 – – 10
Tab. 3: EHMY-LP-EGC-… -KF: number of required mounting components