Festo GDSP−SFC−LACI−ML 0812NH English
15
1
User instructions
English
Intended use
The SFC−LACI is used as a position controller and position
controller for DNCE−
Ū
−LAS and DFME−
Ū
−LAS type drives
The master controller (PLC/IPC) is connected via the con
troller interface:
SFC−LACI−...−IO:
Digital inputs/outputs
SFC−LACI−...−PB:
P
R
OFIB
U
S−DP
SFC−LACI−...−CO:
CANopen
SFC−LACI−...−DN:
DeviceNet
Commissioning and parameterisation are carried out:
with the FCT software package and the SFC−LAC
plug−in (from
V
.3.0.0 and higher) via the
R
S232 inter
face or
for type SFC−LACI−...−H2 optionally with the control
panel (display and four operating buttons).
Note
This brief overview serves only as initial information
and does
not
replace the complete documentation,
which is contained as a PDF file on the CD
R
OM sup
plied.
S
You must observe the information and the safety
instructions in the complete manual for the motor
controller.
S
Please consult your local Festo Service or write to the
following e−mail address if you have any technical
problems: [email protected]
