Festo PDAD, Руководство по эксплуатации

Страница: 35 / 42

Festo — PDAD — 2022-02i
Technical data
35
PDAD -09 -13 -22 -51 -73 -100
Ambient temperature [°C] +5 … +50
Temperature of medium [°C] +2 … +50
Storage temperature [°C] –20 … +60
Product weight [kg] 13 14 16.5 24 31 47
Service life of drying
agent 12000 operating hours
Drying agent Molecular sieve (zeolite), aluminium oxide (AL2O3), layered
Housing material
Profile tubes Wrought aluminium alloy
Sub-base, distributor
plate Die-cast aluminium
Base plate, facings Sheet steel
Mechanical system
Width
2)
[mm] 281 281 281 281 281 281
Depth
2)
[mm] 92 92 92 92 92 184
Height
2)
[mm] 445 504 635 1065 1460 1065
Pneumatic
Input pressure p [MPa] 0.4 … 1.6
[bar] 4 … 16
[psi] 58 … 232
Operating medium Compressed air in accordance with ISO 8573-1:2010 [6:-:4]
Information on the
operating medium Lubricated operation not possible.
Water not permitted at input.
Pressure dew point [°C] –40, at nominal flow rate at output
[°C] –70, at reduced flow rate
Air purity class at the
output Compressed air in accordance with ISO 8573-1:2010 [2:1:2], pres-
sure dew point –70 °C
Compressed air in accordance with ISO 8573-1:2010 [2:2:2], pres-
sure dew point –40 °C
Internal volume [l] 4.2 4.6 6.0 11.0 15.8 22.0
Electrical - data of the integrated electrical controller
Degree of protection IP65 in accordance with EN 60529
Protection class II
Pollution degree 2