Festo MX-2-1/4, Руководство по эксплуатации

Страница: 3 / 6

3. Installation
The valves threaded to to NPT
can be fitted direct a
W h e n please take
count the strength of the plastic thread.
The valve can also be fitted to an mount
ing bracket.
The valve may be installed at any angle.
Permitted tightening torques
Ports 1 and
Brass-version
G 5 N m
G
max. 35 Nm
G max. 60 Nm
Nm G 105 Nm
30 Nm G max. 200 Nm
40 Nm G l max. 380 Nm
G 1 60 Nm G max. Nm
NPT threads 1 turns maximum
Armature tube
55 Nm
55 Nm
3. Montage
Die mit den
bis NPT werden in
M X - .
d e s
D a s an
Die ist
2
G 5 N m max. 35 Nm
G
max. 60 Nm
G Nm
G
max. 105 Nm
G 30 Nm
max. 200 Nm
40 60 Nm Nm G max. max. 380 850 Nm Nm
55 Nm
The port 2 @must not block the internal
can happen the
deeper the valve than the threaded
Die fur den darf
Fall
Function
pressure (0.5 to bar) enters at port
passes through servo-passage and enters
cavity As a result, diaphragm seals off valve
the (brass) the
on and off time can be through screw
If the valve operated water as
regulation S can prevent water hammer.
P 10 bar) im
die im Da-
werden.
a n
I f t h e a n
voltage, stem off the seat and opens hebt vom
passage causes the pressure at to
drop If the pressure difference compared to
0.5 bar (e.g. 6 bar 5.5 bar)
long bar) Membrane den Das
the valve h a v e
hat 1 2 fur
through-flow from 1 2.
bracket
T y p