1. Parts list
9958d_1
1
Housing
2
Segment
3
Segment
4
Inspection window
(A) cut-out
(B) locking lug
(C) slot
2. Setting the limit markings on pressure gauge type MA-…-RG / vacuum gauge type VAM-…-RG
•
Insert a screwdriver into cut-out (A).
•
Lift up the inspection window.
•
Select the appropriate setting template with the aid of the part number.
•
Place the inspection window
4
with the outside downwards centrically on the mirrored scale.
•
Make sure that the locking lug (B) points towards the relevant marking on the template.
•
Place segments
2
and
3
in the inspection window if necessary.
In order to prevent damage to the inspection window, do not use objects with a sharp edge
for setting.
•
Set the lower limit value by turning the lower segment
2
.
•
Set the upper limit value by turning the upper segment
3
.
•
Press the inspection window
4
onto the housing
1
again. Locking lug (B) must snap into the
slot (C) intended.
3. Setting template for the following pressure gauges:
Part numbers: 525725, 525728, 525731, 526778, 526781, 526784, 526786, 526789, 526792,
530387, 530390, 530393
9958d_3
4. Setting template for the following pressure gauges:
Part numbers: 525726, 525729, 525732, 526779, 526782, 526785
9958d_4
5. Setting template for the following pressure gauges:
Part numbers: 526788, 526791, 530389, 530392
9958d_5
6. Setting template for the following pressure gauges:
Part numbers: 525727, 525730, 526780,526783, 546963
9958d_6
7. Setting template for the following pressure gauges:
Part numbers: 526787, 526790, 526793, 530388, 530391, 530394
9958d_2
8. Setting template for the following vacuum gauges:
Part numbers: 547842, 547843
9958d_7
Assembly instructions (en)
707 959 / 2006-11a
†‡
Pressure gauge / Vacuum gauge
MA-...-RG / VAM-...-RG
Festo SE
& Co. KG
Postfach
73726 Esslingen
++49/(0)711/347-0
www.festo.com
1
4
3
2
A
C
B
A
A
B
@
40
@
50
@
63
A
A
B
@
63
@
50
@
40
A
A
B
@
63
@
50
A
A
B
@
63
@
50
@
40
A
A
B
@
63
@
40
A
A
B
@
63
@
40
@
50
