Festo HSP AE Series, Руководство пользователя

Страница: 74 / 174

4. The control panel
4−6
Festo P.BE−HSP−AE−IO−EN en 0510NH
4.2 The menu system
4.2.1 Accessing the main menu
When the power supply is switched on, the MTR−DCI auto
matically carries out an internal check. At first the display
briefly shows the Festo Logo then changes to the status
display.
The status display shows the following information:
the type designation of your motor unit
the current type of the handling module (e.g. HSP−...)
the current position of the drive
á
a
the current setting of the device control
(HMI =
H uman M achine I nterface = control panel).
The current button function will be displayed in the lower
lines of the display:
<Menu> The main menu is accessed from the status
display with the <Menu> button.
4.2.2 Selecting a menu command
<− −> With the arrow buttons on the control panel you can
select a menu command from the list. The current
selection is marked with an arrow (
}
Diagnostic).
Select
S
in order to display further menu com
mands.
ESC With the<menu> button you can interrupt the current
entry and return to the status display or from a sub−
menu to the higher−order menu.
OK With the <Enter> button you can confirm the current
selection or entry.
MTR–DCI–XX–IO–HM
HSP
á
a
= 0 deg
HMI = off
<Menu>
}
Diagnostic
positioning
Settings
S
ESC <Menu>
<––> OK <Enter>
}
HMI control
LCD adjustment
s
ESC <Menu>
<––> OK <Enter>