manualshive.com logo in svg

Festo EXCM-40 -PF Series, Инструкция по эксплуатации

Поделиться
Скачать
Festo EXCM-40 -PF Series Скачать руководство пользователя страница 14

4

Mounting

14

Festo – EXCM-40-EN – 2017-11a – English

4.3

Installation

Note

If there are temperature differences between the product and the mounting surface:

 Adapt the temperature of the product to the temperature of the mounting surface.

Observe the permissible ambient temperatures

(

è

 A.5 Operating and storage conditions).

1. Make sure that the product and mounting surface have the same temperature.

2. Make sure that all of the transport screws have been removed.

3. Attach appropriate lifting gear to the 4 transport lugs 

2

 and 

6

 (

è

 Fig. 4.4).

1

2

3

4

1

5

6

4

5

6

2

1

End cap

2

Transport lug with support plate (2x)

3

Lifting gear

1)

 with mounting points

4

Transport restraint (2x)

5

Drive cover (motor side)

6

Transport lug (on transport restraint) (2x)

1)

not included in scope of delivery

Fig. 4.4

Depicted: EXCM-40-…-B (motor attachment position underneath).

Содержание EXCM-40 -PF Series

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды