Festo EXCM-10, Инструкции по ремонту

Страница: 6 / 52

6 / 52 Festo 7EXCMc_en
1 Important information
1.1 About these repair instructions
This document contains important information about the professional repair of planar surface gantries of the type EXCM.
However, the costs of carrying out a repair must be considered in the case of larger defects.
Before carrying out a repair, the relevant chapter in these instructions must be read in full and followed consistently.
For reasons of clarity, these repair instructions do not contain all detailed information. The following documents should
therefore also be available while performing repair work on the planar surface gantry:
– Description of “mechanical installation”
Describes how to mount, install and dismantle the respective planar surface gantry. It can be found on the Festo
website (

www.festo.com/sp ).
– “Commissioning” description
Describes the functions, the electrical installation, the commissioning using the FCT, the operation, the control
principle and the procedure for error diagnostics for planar surface gantries. It can be found on the Festo website
(

www.festo.com/sp ).
– Spare parts documentation
Contains an overview of the spare and wearing parts as well as information on their installation. This can be found in
the online spare parts catalogue on the Festo website (

www.festo.com/spareparts ).
– “Tools and repair accessories” information brochure
Contains an overview of available assembly tools (e.g. lubricants, locking agent), special tools, schematic diagrams,
fixtures, measuring devices, etc. The information brochure can be found in the online spare parts catalogue on the
Festo website (  Tools and repair accessories.pdf ).
1.2 Symbols used in these repair instructions
Danger categories
The following symbols identify text passages which draw attention to specific hazards.
Danger
Caution
Marking special information
The following symbols identify text passages which contain special information.
Note
Information
Environment