Festo EXCH-40-...-AB1 Series Скачать руководство пользователя страница 10

Страница: 10 / 104

Transport and storage

Festo – GDCP-EXCH-KM-KOMP-EN – 1506a – English

2.3

Unpacking

Note

Damage to the product from incorrect removal of the transport crate.

At least 2 people are required for opening the transport crate.

Observe notes on the transport crate for dismounting.

Due to the weight of the cover: Use suitable aids to raise and lower it (e.g. crane).

Make sure that no packaging parts can fall onto the product.

Open transport crate

1. Dismount cover and side parts in the sequence specified on the crate.

Remove transport mounting

The product is fastened with transport screws in the transport crate.

Movable parts of the planar surface gantry are fixed with cable ties.

These transport fasteners are each marked with a label (

Fig. 2.1).

Warning

Movable parts of the planar surface gantry can move uncontrollably during handling and

mounting.

Danger of crushing and material damage.

Remove cable ties that fix movable parts and the transport protection aids on the

X-axes only

after mounting

the product to the mounting surface.

2. For mounting, remove only the labelled transport screws with which the planar surface gantry is

fastened to the transport crate.

Transport fastener label

Transport screws

Cable ties

Fig. 2.1

Labelling of the transport fasteners

Содержание EXCH-40-...-AB1 Series









































































































Результаты поиска

Содержание EXCH-40-...-AB1 Series

Отзывы:

Бренды по названию

Популярные бренды

Festo EXCH-40-...-AB1 Series, Механическая установка

Результаты поиска

Содержание EXCH-40-...-AB1 Series

Отзывы:

Бренды по названию

Популярные бренды