Festo EXCH-40-...-AB1 Series, Механическая установка

Страница: 59 / 104

5 Mounting (horizontal mounting position)
Festo – GDCP-EXCH-KM-KOMP-EN – 1506a – English 59
5.3.2 Checking the toothed belt pretension
Requirements
For motors with brake:
– when inspecting before commissioning: motors dismounted (
è
4.6.3 Mounting).
– when checking after commissioning: motor brakes released
(
è
Description EXCH-…-C… “Commissioning”).
Procedure
1. Place belt tension setting piece on the X-axis 1 (with energy chain) between the drive cover and
carriage of the X-axis.
The slot of the belt tensioning setting piece is intended for hanging and locking onto the
profile of the X-axis.
The toothed belt pretensioning can be inspected with mounted or dismounted profile
cover of the X-axis.
1 2
4
5
3
1
Traverse (Y-axis)
2
X-axis 1 (with energy chain)
3
Drive cover (motor side)
4
Belt tension setting piece
(dimension L11=144.4 mm)
5
Carriage of the X-axis
Fig. 5.13 Depicted EXCH-40-…-B (motor attachment position underneath);
profile cover of the X-axis dismounted.
2. Push traverse (Y-axis) with the carriage onto the belt tension setting piece.
The distance dimension L11 for checking is set (
è
Tab. 5.2).