Festo ELGC-TB-KF, Инструкции и эксплуатация, Страница: 6 / 20

2. Comply with maximum permitted support clearances when attaching transportation aids
è
13.2 Technical data, characteristic curves.
7 Mounting
7.1 Preparation
– Unscrew screws and threaded pins only when requested.
– Select the motor and motor mounting kit from Festo è www.festo.com/catalogue.
When using other motors: observe the limit values for forces, torques and speeds
è
13 Technical data.
– When mounting the motor: follow the instruction manual for the motor mounting kit.
– In case of large or heavy motors: support the axis-motor combination so that it is free from ten-
sion.
– Connect motor cables only after the axis is mounted.
NOTICE!
The reference position is lost when the motor is dismounted (e.g. when turning the motor around).
•
Start homing è 8 Commissioning.
Fig. 3
CAUTION!
For vertical or slanted mounting position: when power is off, moving parts can travel or fall uncon-
trolled into the lower end position.
Injury due to impacts or crushing.
•
Bring moving parts of the product into a safe end position or secure them against falling.
– Place the product in such a way that the operating elements can be reached (e.g. belt reverser).
– Install product without tension or distortion.
– Fasten product to a mounting surface with flatness of 0.05 % of the stroke length, but max.
0.5 mm.
For gantry applications, attention must also be paid to parallel alignment or product height when
aligning the axes.
For additional information, contact your local Festo Service.
Mounting
6 Festo — ELGC-TB-KF — 2018-08a