ELFC-KF
4
Festo – ELFC-KF – 2017-02 English
1
About this document
For all available product documentation
è
www.festo.com/pk.
The ELFC-KF guide axis is designated the “product” or “axis” in these operating instructions.
Read the operating instructions carefully before starting all work on the product.
2
Safety
2.1
Safety instructions
Observe product labelling.
Before working on the product, switch off the power supply and secure it against being switched on
again.
Store the product in a cool, dry, UV-protected and corrosion-protected environment. Ensure storage
times are short.
Protect the product during operation from damaging influences.
Damaging influences include grinding dust, glowing chips or sparks.
Comply with tightening torques. Unless otherwise specified, the tolerance is ± 20 %.
2.2
Use for intended purpose
The axis is intended to be used for the basic design of the cantilever
or gantry systems, consisting of a drive axis and a passive guide
axis.
The axis is approved for the slide operating mode
è
Fig. 1
2.3
Qualification of specialized personnel
Only qualified personnel may perform installation, commissioning, maintenance and disassembly
of the product.
3
Further information
Accessories
è
www.festo.com/catalogue.
Spare parts
è
www.festo.com/spareparts.
