Festo EGSC-BS-KF, Инструкции и эксплуатация

Страница: 4 / 18

1 About this document
All available documents for the product
è
www.festo.com/pk.
The mini slide EGSC-BS-KF is designated as product in these operating instructions. Read the operat-
ing instructions carefully before starting all work on the product.
2 Safety
2.1 Safety instructions
– Observe product labelling.
– Before working on the product, switch off the power supply and secure it against being switched
back on.
– Store the product in a cool, dry environment that is protected against UV and corrosion. Ensure
short storage times.
– Protect the product during operation from damaging influences.
Damaging influences include grinding dust, glowing chips or sparks.
– Observe tightening torques. Unless otherwise specified, the tolerance is ±20%.
2.2 Intended use
The mini slide is intended to be used for positioning payloads in combination with tools.
The mini slide is approved for the "Slide Operation" mode
è Fig.1.
Fig. 1
2.3 Training of qualified personnel
Only skilled personnel may carry out installation, commissioning, maintenance and disassembly of the
product. The qualified personnel must be familiar with installation of electrical control systems.
3 Additional information
Accessories è www.festo.com/catalogue
4 Service
Contact your regional Festo contact person if you have technical questions
è www.festo.com
About this document
Festo — EGSC-BS-KF — 2018-11c 4