Mounting
–
Fasten the attachment to the slide with screws and centring sleeves. Observe the maximum screw-
in depth D and tightening torque
è
Tab.3.
For attachment components with their own guide:
–
Precisely adjust the additional guide and mini slide or use a connection that enables a tolerance
compensation. In this way, the guide is not overloaded.
B Assembly surface
Fig. 7
Size
25
32
45
60
Screw
M3
M4
M5
M5
Max. screw-in depth D
[mm]
4.5
5
6
8
Tightening torque
[Nm]
1.5
2.7
5.1
6.5
Centring H7
[mm]
@
2
@
4
@
5
@
7
Tab. 3
7.4
Mounting accessories
To protect the end positions against uncontrolled overtravel:
–
Check the necessity of proximity sensors (hardware limit switches).
If proximity sensors are used as limit switches:
–
Preferably use proximity sensors with normally closed function.
This protects against excess travel beyond the end position, if the proximity sensor cable is
broken.
If proximity sensors are used as reference switches:
–
Use proximity sensors that correspond to the input of the controller being used.
Assembly
10
Festo — EGSC-BS-KF — 2018-11c
