EGC-TB-KF, EGC-HD-TB
14
Festo – EGC-TB-KF, EGC-HD-TB – 2017-11c English
For greasing the
bearing guide
(not possible for
EGC-...-
GP/GQ
):
1. Calculate the load comparison factor fv with
the aid of the formula for combined loads
(
è
12 Technical data) and determine the lub
ricating interval S
int
from it (
è
Fig. 12
fv
2. Grease the bearing guide on both sides at all
relubrication openings
aB
.
3. Move the slide over the complete travel dis
tance during lubrication in order to distribute
the grease equally inside.
Fig. 13
aB
9
Repair
Note
Retensioning of the toothed belt reduces its service life considerably. In addition, the
technical data, e.g. the feed constant, change.
Make sure that the toothed belt is not retensioned.
The toothed belt is pretensioned so that it does not have to be retensioned during
its service life.
Recommendation: Send the EGC to our repair service.
This way the fine tuning and tests that are required will be taken into particular consideration.
Information about spare parts and auxiliary means can be found at:
(
è
www.festo.com/spareparts).