DNCE−...−LAS
Festo DNCE−...−LAS 1003b English
33
Measuring system, measuring tape division, interpolation
The distance between two index lines (= north or south pole of the magnetic
displacement encoder) is 5 mm. That equals 2048d (800h) increments. The
increments are calculated by means of interpolation.
This results in the following conversions (all figures are decimal):
mm
+
x Inc
2048 Inc
5 mm
[Inc]
è
[
mm
]
Inc
+
x mm
5 mm
2048 Inc
[
mm
]
è
[Inc]
Installing circuitry
Note
If used in safety−relevant applications, additional measures are necessary.
In Europe, for example, the standards in the EC machinery directive must be
observed.
Without additional measures in accordance with statutory minimum require
ments, the product is not suitable for use in safety−related sections of control
systems.
Содержание DNCE-***-LAS
Страница 129: ...DNCE LAS Festo DNCE LAS 1003b 129...