DGEA-...-YSR
Festo DGEA-...-YSR 2018-12b English
5
3. Fasten the shock absorber in the hole of
the shock absorber support with the aid
of the two locking nuts. At the same time
make sure that dimension s on the con
tracted shock absorber is observed.
DGEA-...
YSR-...
S [mm]
18
...-16-20-C
2
25
...-20-25-C
2
40
...-25-40-C
2
4. Place the sliding blocks in the groove on
the side of the cantilever arm. By means
of a recess, sliding blocks which cannot
be clipped in by tilting, slide into the rel
evant groove.
5. Place the DGEA-...-YSR over the sliding
blocks at the same time observing mini
mum dimension L.
DGEA-...
L [mm]
18
67
25
60
40
81
6. Fasten the shock absorber support
together with the shock absorber with
contact to the drive head.
Fig. 3
s
Fig. 4