Festo CPX-FB23, Электронное руководство

Страница: 32 / 122

1. Installation
1−18
Festo P.BE−CPX−FB23−EN en 0308NH
Setting the system diagnosis
5
With switch element 2 of the 2−element DIL switch 5, you can
set whether the status bits and the I/O diagnostic interface
are to be available in the address range of the CPX terminal
for the system diagnosis.
System diagnosis Setting DIL switch 5.2
No system diagnosis 5.2: OFF
(factory setting)
System diagnosis
(see sections 2.1.6,
Tab.2/9 and 3.4)
5.2: ON
Tab.1/10: System diagnosis
Please note
If the system diagnosis with the status bits or the I/O diag
nostic interface is used, the word range (RWr and RWw) of
station 1 will be assigned for the system diagnosis.
The system diagnosis is only available in the operating mode
Remote I/O:
In the operating mode Remote Controller, DIL switch 5.2 has
no function.
Further information on the status bits and on the I/O diagnos
tic interface can be found in the sections 2.1 and 3.4.