Festo CPX-CTEL-4-M12-5POL Скачать руководство пользователя страница 6

Страница: 6 / 59

Safety and requirements for product use

Festo – P.BE-CPX-CTEL-EN – 1601b – English

Safety and requirements for product use

1.1

Safety

1.1.1

General safety information

Observe the general safety information in the corresponding chapters.

Specific safety regulations can be found immediately before the task instructions.

Note

Damage to the product from incorrect handling.

Switch off power supplies prior to any assembly or installation work. Only switch on

the power supply when the product has been assembled and installation work is

complete.

Never unplug or plug in a product when powered!

Observe the handling specifications for electrostatically sensitive devices.

1.1.2

Intended use

The module provides 4 external I-Port interfaces, each of which can be connected to a device with an

I-Port interface (

2.2 I-Port).

The individual I-Port devices are documented in specific descriptions. The safety instructions specified

in these descriptions must be observed and the respective device must only be used as intended.

The module described in this document has been designed exclusively for use in combination with CPX

terminals from Festo. The CPX terminal and its connected modules are intended for installation in ma

chines and/or automated systems and may be used only as follows:

–

In perfect technical condition

–

in original status without unauthorised modifications, except for the adaptations described in this

documentation.

Содержание CPX-CTEL-4-M12-5POL




























































Результаты поиска

Содержание CPX-CTEL-4-M12-5POL

Отзывы:

Похожие инструкции для CPX-CTEL-4-M12-5POL

Бренды по названию

Популярные бренды

Festo CPX-CTEL-4-M12-5POL, Описание

Результаты поиска

Содержание CPX-CTEL-4-M12-5POL

Отзывы:

Похожие инструкции для CPX-CTEL-4-M12-5POL

Бренды по названию

Популярные бренды