Festo CPX-AP-I-4DI4DO-M12-5P, Инструкции и эксплуатация

Страница: 11 / 22

9 Parameterisation
Various parameters are available for reading out information about the modules in an automation sys-
tem CPX-AP and adapting the modules to the application situation.
Write access to the parameters is typically performed by the higher-level controller using the device
descriptions specific to the host system.
ID Parameter Instance-
s Data
type Access
1)
Arraysize
70 Part number 1 UINT32 ro
–
246 Fieldbus serial number 1 UINT32 ro
–
791 Product key 1 CHAR ro 12
960 Firmware version 1 CHAR ro 30
20000 Module code 1 UINT32 ro
–
20014 Input debounce time
–
0: 0.1 ms
– 1: 3.0 ms (factory setting)
– 2: 10 ms
– 3: 20 ms
4 UINT8 rw
–
20022 Configuration of voltage monitoring load
supply PL
–
0: load voltage monitoring inactive
– 1: load voltage monitoring active, with
suppression of diagnostics at switch-
off (factory setting)
– 2: load voltage monitoring active
1 UINT8 rw
–
20052 Behaviour in error state (communication
fault)
–
0: reset outputs (factory setting)
– 1: maintain status
1 UINT8 rw
–
20085 Measured value temperature AP-ASIC [°C] 1 INT16 ro
–
20087 Current measured value of logic supply PS
[mV] 1 UINT16 ro
–
20088 Current measured value of load supply PL
[mV] 1 UINT16 ro
–
20093 Hardware version 1 UINT8 ro
–
1) ro = read only; rw = read write
Tab. 11 Parameter
Parameterisation
11 Festo — CPX-AP-I-4DI4DO-M12-5P — 2019-06