Festo CPX-AP-A-8DI-M12-5P, Руководство по эксплуатации

Страница: 8 / 16

8 Festo — CPX-AP-A-8DI-M12-5P — 2022-07
Diagnostics and fault clearance
Response of the display components of the module after error-free commissioning
[MD]
green light
Tab. 6: Response of the LED displays of the module after error-free commissioning
Information on troubleshooting in the event of incorrect response:
è 9 Diagnostics and fault clearance
è
1.1 Applicable documents
8 Parameterisation
Various parameters are available for reading out information about the modules in an automation
system CPX-AP-A and for adapting the modules to the application situation.
Write access to the parameters is typically performed by the higher-level controller using the device
descriptions specific to the host system.
ID Parameter Instances Data type Access
1
)
Array
size
246 Fieldbus serial number 1 UINT32 ro –
791 Product key 1 CHAR ro 12
960 Firmware version 1 CHAR ro 30
20000 Module code 1 UINT32 ro –
20014 Input debounce time
–
0: 0.1 ms
–
1: 3.0 ms (factory setting)
–
2: 10 ms
–
3: 20 ms
1 ENUM_ID rw –
20085 Measured value of temperature AP-ASIC [°C] 1 INT16 ro –
20087 Current measured value of logic supply (PS) 1 UINT16 ro –
20088 Current measured value of load supply (PL) 1 UINT16 ro –
20093 Hardware version 1 UINT8 ro –
1) ro = read only; rw = read write
Tab. 7: Parameter
9 Diagnostics and fault clearance
9.1 Diagnostics messages
The following table contains the diagnostic messages of the module.