6
Festo — CPX-4AE-4AA-H — 2021-06b
Safety
1.3
Specified standards
Version
NAMUR NE43:2003-02
Tab. 2: Specified standards
2
Safety
2.1
Safety instructions
–
Only use the product if it is in perfect technical condition.
–
Observe labelling on the product.
–
Take into consideration the ambient conditions at the location of use.
–
Prior to mounting, installation and maintenance work: Switch off power supply and secure it from
being switched back on.
–
Comply with the handling specifications for electrostatically sensitive devices.
–
Seal unused connections with cover caps to achieve the required degree of protection.
–
Use connection hardware with the required degree of protection.
–
Store the product in a cool, dry environment protected from UV and corrosion. Keep storage times
short.
–
The product may generate high frequency interference, which may require interference suppression
measures in residential areas.
2.2
Intended use
The input module is intended solely for use in terminal CPX and terminal CPX-P of Festo. The input
module is referred to as an analogue module in this document.
–
Operate the product only with suitable CPX bus nodes
Tab. 3 Suitable bus nodes/controllers and
required revisions.
Connect a maximum of 5 analogue modules with HART functionality to the bus nodes CPX-FB13
(PROFIBUS).
–
Use only permissible combinations of module components
Tab. 4 Permissible combination of
manifold block and interlinking block.
–
Only use the product in original status without unauthorised modifications. Only the conversions or
modifications described in this and the further applicable documents are permitted.