Festo CP-A04-M12-CL, Руководство пользователя, Страница: 43 / 86

2. Input modules type CP−E08−M...−CL and CP−E16−KL−CL
2−15
Festo P.BE−CPEA−CL−E N en 0404NH
Status LED
Short circuit/overload Short circuit or overload of the sensor supply is shown by
means of the status LED short circuit/overload
(see Tab.2/4).
LED (red)
Sequence Operating status Fault treatment
LED is out
ON
OFF
No short circuit/overload in
sensor supply
·
None
LED lights up
ON
OFF
Short circuit/overload in
sensor supply
·
Eliminate short circuit and
delete the fault
Tab.2/4: Status LED short circuit/overload
Reaction to short circuit in the sensor supply
If there is a short circuit, the input module will switch off the
power supply to the sensors and communicate the fault to
the CP master. The status LEDs will be switched off and the
inputs of the module supply a 0−signal. The power supply will
be switched on again automatically when the short circuit has
been eliminated.