Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 47 / 616

Designation Function
"Start first setup..."
Open initial commissioning assistant for the device.
The command can be executed if the following prerequisites are met:
–
The plug-in is
not
connected to a device.
– The drive configuration is
not
open for editing.
Tab. 26 Additional commands of the "Parameterisation"context
Title bar of the work area
The title bar of the work area for the "Parameterisation" context contains additional commands.
You can switch between the graphical and tabular display via the title bar of the working area or by
using the [Ctrl] and [F6]
è 2.1.4 Key combinations key combination.
Symbol Description
Switch to graphical display.
Switch to tabular display.
Tab. 27 Description of the symbols for switching the page view
Graphical display
The graphical display shows all of the parameters for the parameter group that are normally required.
Tabular display
The tabular display shows all of the available parameters for the parameter group.
If the tabular display is selected, the title bar of the working area contains the following additional
commands for the current parameter panel:
Symbol Description
All of the groupings are opened.
All of the groupings are closed.
Filter view is displayed.
All of the filters can be hidden and shown with the [Ctrl] and
[L] key combination
è
2.1.4 Key combinations.
Update filtered list.
CMMT-ST Plug-in
47 Festo — CMMT-ST-SW — 2019-02