Festo Belt Drives 2 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 31

background image

Order no.:

54977-3C

First Edition
Revision level: 02/2018

By the staff of Festo Didactic

© Festo Didactic Ltée/Ltd, Quebec, Canada 2018
Internet: www.festo-didactic.com
e-mail: [email protected]

Printed in Canada
All rights reserved
ISBN 978-2-89789-122-0 (Printed version)
ISBN 978-2-89789-124-4 (CD-ROM)
Legal Deposit – Bibliothèque et Archives nationales du Québec, 2018
Legal Deposit – Library and Archives Canada, 2018

The purchaser shall receive a single right of use which is non-exclusive, non-time-limited and limited
geographically to use at the purchaser's site/location as follows.

The purchaser shall be entitled to use the work to train his/her staff at the purchaser’s site/location and
shall also be entitled to use parts of the copyright material as the basis for the production of his/her own
training documentation for the training of his/her staff at the purchaser’s site/location with
acknowledgement of source and to make copies for this purpose. In the case of schools/technical
colleges, training centers, and universities, the right of use shall also include use by school and college
students and trainees at the purchaser’s site/location for teaching purposes.

The right of use shall in all cases exclude the right to publish the copyright material or to make this
available for use on intranet, Internet and LMS platforms and databases such as Moodle, which allow
access by a wide variety of users, including those outside of the purchaser’s site/location.

Entitlement to other rights relating to reproductions, copies, adaptations, translations, microfilming and
transfer to and storage and processing in electronic systems, no matter whether in whole or in part, shall
require the prior consent of Festo Didactic.

Information in this document is subject to change without notice and does not represent a commitment on
the part of Festo Didactic. The Festo materials described in this document are furnished under a license
agreement or a nondisclosure agreement.

Festo Didactic recognizes product names as trademarks or registered trademarks of their respective
holders.

All other trademarks are the property of their respective owners. Other trademarks and trade names may
be used in this document to refer to either the entity claiming the marks and names or their products.
Festo Didactic disclaims any proprietary interest in trademarks and trade names other than its own.

«
1
2
3
4
...
»

Содержание Belt Drives 2
































Отзывы:

Нет отзывов

Похожие инструкции для Belt Drives 2

Бренд: Keithley Страницы: 32

Бренд: jcb Страницы: 166

Бренд: RASHA PROFESSIONAL Страницы: 11

Бренд: MADRIX Страницы: 24

Бренд: MADRIX Страницы: 28

Бренд: Ecler Страницы: 108

Бренд: R&S Страницы: 121

Бренд: Quark-Elec Страницы: 2

WELCH LVS 600 T

Бренд: Gardner Denver Страницы: 68

DependaBar DB-18-PCW

Бренд: Healthcraft Страницы: 13

Бренд: IntesisBox Страницы: 2

Бренд: Maquet Страницы: 72

Бренд: fasciotens Страницы: 4

Бренд: Buyers Страницы: 2

Бренд: Drive Страницы: 2

Бренд: TECALEMIT Страницы: 19

18 Liter/30 Cans Sport Fridge with AM/FM radio

Бренд: Wagan Страницы: 4

VARICOVER MST 3A

Бренд: GEA Страницы: 90

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды