Festo 548076 Скачать руководство пользователя | Manualshive

Страница: 90 / 92

background image

90 / 92

Festo 7DHTGd_en

5

Cleaning

Note

Regular removal of the lubricating grease on the surfaces reduces the life.

Note

• Clean with a soft, lint-free cloth and non-abrasive cleaning agents.
• Check the compatibility of the cleaning agent with the materials to be cleaned.

6

Maintenance

This chapter contains important technical information about the maintenance work to be carried out on the rotary index-
ing table. A detailed description of the steps for care and maintenance can be found in the operating instructions. Further
information on the assembly aids and lubricants can be found on the Festo website (



6.1

Cleaning and lubricating the rotary indexing table

Clean the rotary indexing table using a soft cloth and a gentle cleaning product if necessary.
The rotary indexing table is otherwise maintenance free due to its lifetime lubrication. Regular removal of the lubricant on
the surfaces reduces the service life.
Lubricate the following components after a conversion (e.g. to reciprocating motion):
• Piston chamber, seals, locking clip, gear racks, pinion and index plate.
The required grease (LUB-E1 silicone-free) is included in the conversion kits and sets of wearing parts.
General relubrication of the mechanical components every 5 million switching cycles is recommended.

Further information on the assembly aids and lubricants is included in the

“Tools and repair accessories”

information

brochure. The information brochure can be found in the online spare parts catalogue on the Festo website (



and repair accessories.pdf

).

6.2

Inspection interval for the shock absorber

Check the shock absorbers every 2 million strokes for the following points:
–  Oil leakage
–  Hard knocking
–  Function (shock absorber head must not remain in the retracted end position).

«
...
88
89
90
91
92
»

Содержание 548076





























































































Отзывы:

Нет отзывов

Похожие инструкции для 548076

Бренд: Raymarine Страницы: 55

Бренд: Halyard Страницы: 4

Underwater Light Show & Fountain

Бренд: GAME Страницы: 2

Бренд: Yamaha Страницы: 78

Бренд: Fast Страницы: 42

Бренд: DARAY Страницы: 28

Бренд: Haenim Страницы: 2

Бренд: Panasonic Страницы: 30

Бренд: SAMCHULLY Страницы: 48

Бренд: ZIGBEE Страницы: 4

Бренд: CAIRE Страницы: 38

Бренд: Caframo Страницы: 72

Бренд: Haag-Streit Страницы: 18

Бренд: Haag-Streit Страницы: 20

Бренд: V-TEK Страницы: 2

Бренд: V-TEK Страницы: 112

Бренд: Rane Страницы: 38

Бренд: Kartsana Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды