MACHINES AND
ACCESSORIES
Page 14 of 22
2. After inserting the electric pump inside the tank, align
the four fastening holes on the edge of the electric
pump with the holes on the coolant tank, then insert
the fastening bolts (the biggest in the package),
interposing between the bolt and the pump a flat
washer and a split washer.
Figure 4 – Fixing the pump
3. Once all the bolts have been inserted, fasten them
using the special nuts included in the package, using a
hexagonal wrench and an Allen wrench.
Figure 5 - Pump insertion.
4. After attaching the electric pump, fit the coolant tank
lid and align the two fastening holes.
Figure 6 – Lid fitting
5. Secure the lid using the appropriate bolts supplied (the
smallest in the package), interposing between the bolt
and the lid the special flat washer, then tighten the
bolts using an Allen wrench.
Figure 7 – Fixing the lid
fervi.com
