MACHINES AND
ACCESSORIES
Page 4 of 11
1 GENERAL INFORMATION
This manual is considered an integral part of the lighting device to which it was attached at
the time of purchase.
The manufacturer holds all ownership to material and intellectual property of this manual;
any disclosure or copying, even partial, of this publication without prior written consent is
forbidden.
The manufacturer waives any and all responsibility for damage to people and/or
things caused by non-observance of the instructions in this manual.
Users will be held fully responsible for any changes they have made to the device,
and the manufacturer will not be held responsible for any damage caused to
persons and/or property resulting from maintenance and/or modifications carried
by unqualified personnel and in a manner that differs from the operating
procedures shown below.
2 GENERAL SAFETY WARNINGS
Risks Associated with Using the Lamp
Every person who is in charge of the installation, use and maintenance of the LED light
machine operation lamp without transformer must carefully read this manual and, particularly,
this section on safety in order to be fully educated on the equipment.
2.1 Precautions with regard to electric shocks
Risks associated with electric shocks
Check that the power cable is disconnected before touching parts of the device where
voltage is present.
Touching these parts without disconnecting the power supply may cause an electric
shock.
Make sure that the power supply used meets the requirements for voltage and
frequency required by the device (shown on the identification plate).
The use of different types of power supplies may cause an electric shock, as well as fire
or damage to the device.
DO NOT spray or pour water on the unit, this may cause an electric shock.
Using the device while disassembled may cause an electric shock.
Regrading the repair of the equipment contact Technical Support.
fervi.com
