Fervi 0560 Скачать руководство пользователя страница 2

Страница: 2 / 26

MACHINES AND
ACCESSORIES

Page 2 of 26

PREFACE

Read this manual before operation

ORIGINAL INSTRUCTIONS

Before starting any operation it is compulsory to read this instruction manual. The guarantee

of smooth operation and full performance of the machine is highly dependent on the
application of all the instructions contained in this manual.

Qualifications of the operator

The operators assigned to using this machine must be supplied with all of the necessary

information and instruction and should be provided with adequate training regarding
safety in pertaining to:

The conditions of use of the equipment;

Foreseeable abnormal situations;

pursuant to art. 73 of Legislative Decree no. 81/08.

We guarantee the machine complies with the specifications and technical instructions
described in this Manual on the date of issuance, listed on herein. However, the
machine may undergo technical modifications in the future, which may also be

significant, without the manual being updated.
Contact FERVI for information on any variations that may have been made.

VERSION. 1

February 2013

fervi.com

Содержание 0560



























Результаты поиска

Содержание 0560

Отзывы:

Бренды по названию

Популярные бренды

Fervi 0560, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 0560

Отзывы:

Бренды по названию

Популярные бренды