MACHINES AND
ACCESSORIES
Page 5 of 17
2 GENERAL SAFETY WARNINGS
Even if you are already familiar with the
Hydraulic Pump,
you must read this manual
carefully to acquire full knowledge of the machine and general precautions to be observed
during operation.
Risks related to Using the Machine
For safe use of the pump, it is necessary to take note of all the requirements for the
prevention of accidents detailed in the various sections of this manual.
The pump must only be used by personnel who have been specially trained by
authorized personnel.
Only use the pump with single-acting cylinders.
Before starting work, make sure that the pump is in good condition.
Do not adjust the safety valve!
Place the pump on a flat, solid and durable work surface.
Do not try to operate the machine at higher performance levels than those for which it
was designed,
in particular regarding the magnitude of the load to be lifted.
In
other words, do not load the pump beyond its capacity.
If you use the pump to lift a vehicle, lock the wheels of the vehicle with the parking
brake.
Always use a safety support, such as a tripod, to support the load in case you
need to work under the load.
It is recommended that users of this publication, for maintenance and repair, have a
basic knowledge of mechanical principles and of repair technique procedures.
Replace worn or damaged parts, check that the repairs and protection work correctly
before operating.
Make sure that the work environment is forbidden to children, non-employees and
animals.
2.1 Technical support
For any problems or concerns, please do not hesitate to contact the dealer who sold the item.
2.2 Other provisions
The first thing to do when starting work is to check the presence and integrity of the
protections and the operation of the safety devices.
Do not use the Pump if it is defective!
fervi.com
