MACHINES AND
ACCESSORIES
Page 5 of 36
A
ll
rig
h
ts
a
re
res
er
ved
o
f rep
ro
du
ct
io
n
a
n
d
d
iss
em
in
at
io
n
o
f t
h
is
T
ec
h
n
ica
l M
an
u
al
an
d
d
o
cu
m
en
ta
tio
n
c
ited
a
n
d/o
r a
tta
ch
ed
. I
t i
s exp
res
sly
fo
rb
id
d
en
to
rep
ro
du
ce,
p
u
bli
sh
o
r
dist
ri
bu
te
a
n
y
in
fo
rm
at
io
n
fr
o
m
th
is
M
an
u
al.
C
op
yr
ig
h
t b
y
FE
R
V
I
1
INTRODUCTION
This manual is delivered with the machine, and it must be regarded as an inseparable part of
it.
The manufacturer holds all ownership to material and intellectual property of this manual;
any disclosure or copying, even partial, of this publication without prior written consent is
forbidden.
The purpose of this manual is to provide the knowledge necessary for the use and
maintenance of the machine
Drill press Art. 0012
and create a sense of responsibility and
an understanding of the capabilities and limitations of the means entrusted to the operator.
As the machine is entrusted to experienced and skilled operators, the following machine must
be perfectly known by the operator if you want it to be used safely and effectively.
Operators must be properly trained and prepared, so make sure that this manual is read and
consulted by the staff responsible for commissioning, operation and maintenance of the
Drill
press.
This is to make all operations the safest and most effective possible for those who
carry out these tasks.
Therefore, it is imperative to strictly comply with the requirements in this manual, a
necessary condition for safe and satisfactory operation of the machine.
Prior to installation and use of the
Drill press
, authorised personnel shall:
carefully read this technical document;
know which protections and safety devices are available on the machines, their location
and how they work.
It is the responsibility of the buyer to ensure that users are properly trained, that they are
aware of all the information and instructions in this document and that they are aware of the
potential risks that exist while working with the
Drill press
.
The manufacturer waives any and all responsibility for damage to people and/or
things caused by non-observance of the instructions in this manual.
The
Drill press
was designed and built with mechanical guards and safety devices designed
to protect the operator/user from possible injury. It is strictly forbidden to modify or remove
guards, safety devices and caution labels. If this must be done (for example, for cleaning or
repair), make sure that no one can use the machine.
Modifications to the machine carried out by the user must be considered their sole
responsibility, therefore the manufacturer waives any and all responsibility for any
damage caused to persons and/or property resulting from maintenance performed
by unqualified personnel and in a manner unlike the operating procedures shown
below.
fervi.com
