F
F
F
-706
-708
-715
•
•
Pure sine wave power inverter
INSTRUCTIONS:
IMPORTANT: Keep the inverter working at 85% the nominal
power to prevent an overload.
1. CONNECTION:
Warning: Keep the connection fixed and firm in the battery
and the inverter; otherwise, it may be very dangerous.
2. DISCONNECTION:
3. USB OUTPUT (5V, 500mA):
•
•
•
•
•
•
•
•
Check that the inverter is turned off (switch 4 in the OFF
position).
Make sure the battery voltage is 12 V.
Connect the positive (red) terminal to the positive battery pole
(+) and the negative (black) terminal to the negative battery
pole (-).
Press the on switch 4 (ON position), and the green LED 1 will
light up. If the alarm sounds or the red LED 2 lights up, turn off
the inverter and check the connections.
First, turn off the inverter (switch 4 in the OFF position).
First disconnect the negative terminal from the negative battery
pole (-) and then the positive terminal from the positive battery
pole (+).
The USB output is exclusively for charging (smartphones,
tablets, mp3...). There is no data exchange function.
Before charging, make sure the device charging current is
below the inverter current.
Reversing the connection may destroy the device.
FERVE, S.A • Ctra. de Calafell, 15-25 - Apartado (P.O. Box) 7 • 43700 El Vendrell (España)
2070006-0116
DECLARACIÓN DE CONFORMIDAD
Inversores de potencia
F-706, F-708 & F-715
EN 60335-1:2012 EN 60335-2-29:2006
2006/95/CE
DECLARATION OF CONFORMITY
Power inverters
Nosotros, We, FERVE, S.A.
declaramos, bajo nuestra única responsabilidad, que los productos
a los que esta declaración se refiere,
son conformes a la siguiente norma:
según las disposiciones de la Directiva:
declare, under our sole responsibility, that the products
to which this declaration relates,
are in conformity with the following standard:
following the provisions of Directive:
El Vendrell, 2016
FERVE warrants this device against all-
defective or faulty manufacturing or parts
for a period of 24 months as of the purchase
date.This warranty excludes damages
caused by mishandling, dirt and filth,
improper connection or power, accidents
and, in general, any damages arising from
causes that are external to the device. Any
other warranty performance agreed to by
the distributor shall be the exclusive liability
of this party. Furthermore, this document
does not cover wear or damage caused to
other goods or assets as a result of a fault in
the device under warranty.This warranty is
only valid when accompanied by the
original invoice or sales receipt. This
warranty shall lose validity if the device is
handled by personnel or shops not related
to our technical service.
FERVE garantiza este aparato contra todo
defecto de fabricación o de las piezas
durante un período de 24 meses a partir de
la fecha de compra. Quedan excluidos los
daños provocados por errores de manejo,
suciedad, conexión o energía inadecuada,
accidentes y en general aquellos que
provengan de causas externas al aparato.
Cualquier otra prestación comprometida
por el distribuidor será de la exclusiva
responsabilidad del mismo. El presente
documento tampoco cubre los deterioros
ocasionados a otros bienes como
consecuencia de un defecto del aparato
garantizado. Esta garantía solamente
tendrá validez acompañada de la factura de
c o m p r a
o r i g i n a l
o
e l
r e c i b o
d e l
establecimiento. Esta garantía perderá su
vigencia cuando el aparato sea manipulado
por personal o talleres ajenos a nuestros
servicios técnicos.
GARANTÍA
WARRANTY
1.
2.
3.
4.
5.
6.
7.
8.
On /green LED: Lights up when the inverter is connected to the
power supply.
Error / red LED: Lights up to indicate an error.
USB Output: 5 V DC, 500 mA.
On/off switch: To turn the inverter on and off.
220-240V, 50Hz alternating current (AC) output.
Heat dissipation fan: Smart control, begins working when the power
reaches 30% or the internal temperature reaches 60º C.
"+" / red terminal: Connect this terminal to the positive battery pole
(red wire).
"-" / black terminal: Connect this terminal to the negative battery
pole (black wire).
PRECAUTIONS:
•
•
•
•
•
•
•
Do not use the inverter with wet hands.
After extended operation, the outside may become very hot.
Do not insert metal parts into the inverter; doing so could
cause electric shock.
Do not expose the inverter to rain, fog or ice and avoid contact
with water or oil.
When you insert the plug into the inverter 5 alternating
current (AC) output, do not touch the metal part of the plug.
Doing so may cause electric shock.
Do not connect alternating current to the inverter 5 alternating
current (AC) output. This would destroy the inverter and could
cause electric shock.
Do not dismantle or open the inverter; this may only be done
by a qualified professional.
6
7
8
Back panel:
IMPORTANT: DO NOT INVERT THE POLARITY;
DOING SO WILL DESTROY THE INVERTER.
1
2
3
4
5
DESCRIPTION:
Front panel:
