0101-9031-0, Rev. B
1
Genius II User Manual
1 Genius II Quick Start Guide
1.1
Contents of Genius II Kits
Your Genius II kit contains the following components:
•
Genius II Control Unit, containing Ebeam, Turret, and Sweep Control Modules
•
Hand-held controller with 10-ft. connection cable
•
Mounting hardware for installation in a standard 19-inch rack
•
Magnet-connection cable (PN 1-9500003)
•
Input power cable (PN 1-9500024)
•
Grounding cable (PN 1-9500001)
1.2 Basic Hardware Installation
Step
Action
1
Using the mounting hardware supplied, install the Genius II controller
in a standard 19-inch rack.
2
Plug the connector on the end of the remote controller’s cable into the
port indicated in Figure 1.
Figure 1 Genius II Front Panel, Showing Connections Port for Hand Held Remote Controller
Connection Port for Hand
Held Remote controller
On/Off Button
