2
GENERAL INSTRUCTIONS
General information
This manual is intended only for the authorised and qualified installer, who must be properly trained and have all the
mental and physical requirements required by law .
All operations must be carried out with care and in a workmanlike manner, in accordance with the current safety at
work regulations .
After removing the packaging, check the integrity and completeness of the contents . In case of non-compliance,
contact the Agency that sold the unit .
Do not modify the safety or adjustment units without authorisation and instructions from the manufacturer .
The packaging material is potentially hazardous and must not be dispersed or left within the reach of children .
Any repairs or maintenance must be carried out by the After-Sales Service or by qualified personnel in accordance
with this manual .
Do not modify or tamper with the unit as this may create a hazard and the manufacturer will not be liable for any
damage caused .
TABLE OF ELECTRICAL CHARACTERISTICS
G
Power supply voltage
H
Maximum current absorption
I
Maximum power absorption
L
Power cable min . section
M
Min . and max . operating temperature limits
N
Min . and max . relative humidity limits
20
40
60
80
G
V/ph/Hz
230/1/50 +0 -10%
H
A
0 .11
0 .16
0 .18
0 .26
I
W
12
18
20
26
L
mm²
1 .5
M
°C
0 – 50
N
%
15 - 85
