Ferroli PEGASUS F2 102, Инструкция по установке и обслуживанию

Страница: 18 / 24

Pegasus F2
18
Gas pressure adjustment:
- Move the protective cover by turning it on its hinges.
- Using a small screwdriver (no. 3), turn the regulating screw to
set the required pressure.
Note: The pilot light requires no adjustments.
Fig. 8a
Slow startup adjustment
- Unscrew the black plastic cap
- Using the cap as a tool turn the pin under it to the desired
setting.
- Screw the plastic cap back.
Fig. 8c
Main gas flow rate adjustment (valve V2)
- Loosen the securing screw using a screwdriver.
- Turn the knob to the required setting, then re-tighten the
securing screw.
Note: Pressure measured at pressure test points is displayed 30
seconds or more after performing the adjustment.
Fig. 8b