Ferroli OPTIMAX HE 31 C Скачать руководство пользователя страница 2

OPTIMAX HE 31 C

2

•  Read the warnings given in this manual thoroughly. 

They provide important information for safe instal-

lation, use and maintenance

•  By law the instruction manual must be left with the 

end user.

• If the appliance is sold or transferred to another 

owner or if the owner moves, leaving the appliance 

behind, always ensure that the manual is kept with 

the appliance for consultation by the new owner 

and /or installer.

•  Incorrect installation or poor maintenance absolves 

the manufacturer from all liability for damage to 

people or property.

• Installation and maintenance must be carried out 

in conformity with current legislation, according 

to the manufacturer’s instructions and by qualified 

personnel.

•  Before service or maintenance work is, carried out 

isolate the appliance from the mains electricity 

supply. 

•  In the event of malfunction or faulty operation, iso-

late the appliance. Do not attempt to repair or carry 

out any other operation on the appliance directly. 

Contact qualified personnel only.

•  Repairs or the replacement of components must be 

carried out exclusively by qualified personnel using 

original spare parts only. Failure to respect the above 

may compromise the safety of the appliance.

•  To guarantee efficient operation, the appliance must 

be serviced once a year by a corgi registered engi-

neer.

•  The appliance may not be used for purposes other 

than those for which it was explicitly designed. Any 

other use is considered improper and therefore dan-

gerous.

•  Incorrect installation and use or failure to follow the 

instructions provided by the manufacturer absolve 

the manufacturer from all liability for damage.

•  After unpacking, check that the contents are complete 

and undamaged.

•  Keep the packaging out of reach of children as it is 

potentially hazardous.

•  To clean external parts, use a damp cloth moistened 

with soapy water if necessary. Avoid using abrasive 

cleaning products and solvents.

This symbol indicates 

“Caution” 

and is placed next to all safety information. 

Strictly follow these instructions in order to avoid danger and damage to persons, 
or property.

This symbol calls attention to a note or important information, please read thor-
oughly.

IMPORTANT

•  

Your "benchmark" Installation, Commissioning and Service Record Log Book is enclosed in the 
last pages of this manual. “This record must be completed and left with the end user

”.

  Ferroli is a member of the Benchmark initiative and fully supports the aims of the programme. 

Benchmark has been introduced to improve the standards of installation and commissioning of 
central heating systems in the UK and to encourage the regular servicing of all central heating 
systems to ensure safety and efficiency. Please see installation and servicing guidelines.

  For EIRE ( Southern Ireland ) it is necessary to complete a “Declaration of Conformity “ to indicate 

compliance to I.S. 813. An example of this is given in the current edition of I.S. 813. In addition 
it is necessary to complete the “Benchmark” logbook.

•  

"Ferroli declare that no substances harmful to health are contained in the appliance or used 
during the appliance manufacture

”.

Содержание OPTIMAX HE 31 C









































Отзывы: