Ferroli OMNIA S HYBRID C 3.2, Руководство по установке, использованию и обслуживанию

Страница: 57 / 88

57
EN
Cod. 3542B250 - Rev. 00 - 02/2022
OMNIA S HYBRID C 3.2
Cool mode weekly schedule (Preset Temp. Cool)
User menu > Preset temp > Preset Temp Cool
The submenu with the 7 days of the week will appear, for each day there are 6 possible events to be set from Event 1 to Event 6 will appear.
Monday
Event 1 Enabled y/n Enable the event
Event 2 Time Start time hh:mm
Event 3 Temperature Water temperature setpoint
Event 4
Event 5
Event 6
Heat mode weekly schedule (Preset Temp. Heat)
User menu > Preset temp > Preset Temp Heat
The submenu with the 7 days of the week will appear, for each day there are 6 possible events to be set from Event 1 to Event 6 will appear.
Monday
Event 1 Enabled y/n Enable the event
Event 2 Time Start time hh:mm
Event 3 Temperature Water temperature setpoint
Event 4
Event 5
Event 6
The temperature setting remains active until the next enabled event. At the start of this new enabled event, the new associated temperature is set on the machine
and so on.
Climate curves (Weather Temp Set)
User menu > Preset temp > Weather Temp Set
The function allows you to set the water flow temperature set point for Heat mode and Cool mode as a function of the outside air temperature.
Z1 Cool Mode
Enabled y/n Enables the climatic curve for zone 1 in cooling mode
Clim Curve Sel to select the climatic curve in cooling mode
Z1 Heat Mode
Enabled y/n Enables the climatic curve for zone 1 in heating mode
Clim Curve Sel to select the climatic curve in heating mode
Z2 Cool Mode
Enabled to select the climatic curve in cooling mode
Clim Curve Sel to select the climatic curve in heating mode
Z2 Heat Mode
Enabled y/n Enables the climatic curve for zone 2 in heating mode
Clim Curve Sel to select the climatic curve in heating mode
When the climatic curves are enabled, it is not possible to modify the T1S set point manually and a warning message will appear.
Economy mode (Eco Mode)
User menu > Preset temp > Eco Mode
Enabled y/n yes/no enables the ECO function (not available for 2 zones)
Clim Curve Sel 1-9 select the climatic curve from 1 to 9
Timer enabled y/n yes/no Enable the timer
Start hh.mm start time
End hh.mm end time
If ECO mode is enabled:
• Timer = not enabled, ECO is always active.
• Timer = enabled, the start and end times must be set
Silent Mode
User menu > Options > Silent Mode
It is possible to enable the mode by choosing between 2 silencing levels:
• Level 1, silent
• Level 2, extra silent
It is possible to program 2 activation time bands (Timer 1 and Timer 2).
Enable Y/N yes/no enables silent mode
Silent Level 1-2 to set silent level
Timer 1 Start it is possible to set the start time of timer 1
Timer 1 End it is possible to set the end time of timer 1
Timer 1 On/Off enable timer 1 or not
Timer 2 Start it is possible to set the start time of timer 2
Timer 2 End it is possible to set the end time of timer 2
Timer 2 On/Off enable timer 2 or not
If Timer 1 and / or Timer 2 are disabled, the silent mode is always active.